Tels: 735-0581 to 83; 495-0187 to 88

Pages: 1 2 3 4 5
Choose a Sub Category :

Cutting Fluids

  

General Applications:

Bending, Boring, Broaching, Drawing, Drilling, Engraving, Facing, Forming, Grinding, Lubricating, Milling, Pre-coating, Reaming, Sawing, Stamping, Tapping, Threading, Turning

  

  

Tapmatic #1 Gold

  • Great for steel and aluminum

  • Excellent for low speed, high pressure applications

  • Minimizes torque increases

  • Does not contain chlorinated paraffins, water, solvents or inactive fillers

  • Aerosol provides a pinpoint stream with foaming action

  • Safe on all metals

Tapmatic AquaCut

  • Water-based formula

  • Excellent in applications where cooling of the tool is desired

  • Nonflammable

  • Nonhazardous

  • Does not contain sulfur, chlorinated solvents, chlorine or oils

  • Safe on all metals, except magnesium

  • Corrosion inhibitors prevent flash rusting

  • Provides fine finishes

  • Cinnamon scent

    

Renewal

STRONG STEEL STICK Renewal Composite

  • Hand-kneadable, ready-to-use stick for fast emergency repairs

  • Hardens like steel in 20 minutes

  • Can be machined, drilled, tapped and painted in 30 minutes

  • Plugs and seals leaks

  • Permanently fill gaps and holes in metal, concrete, wood, fiberglass and ceramics

  • Patches holes and cracks in pipes, drums and tanks

  • Can be used for underwater repairs

  

FLOOR PATCH Renewal Composite

  • Repairs holes and cracks in concrete floors, walls, and other surfaces with a tough, durable filler.

  • Adheres to concrete, bricks, masonry, & metal surfaces

  • Bonds securely to new concrete or old concrete

  • Compression strength is over two times as high as concrete

  • Withstands light traffic after 5 hours & heavy traffic in 8 hours

  • Easy to mix & apply

  • Excellent resistance to water, oil, & most chemicals

  • Covers 16 square feet per 40 pound kit at 1/4” thickness

  • Temperature resistance of 150° F (66°C)

   

Steel Putty

Patch and repair areas where welding or brazing would be undesirable or impossible with Steel, the original metal-filled epoxy putty used for hundreds of routine maintenance, production, and tooling applications.

   

Aluminum Putty

Aluminum-filled epoxy putty for dependable non-rusting repairs to aluminum castings, machinery and equipment widely used in HVAC applications.

   

Stainless Steel Putty

Stainless steel-filled epoxy putty for patching, repairing and rebuilding stainless steel food processing equipment

   

   

Crack Detectors

     

  

  

     

  Weldwell Flux
- Dust-all Soldering Flux
- 509 Flux - AMCO-49

Tigkleen – heat stain remover for TIG welding

 

Markers

                 Tempilstiks indicators are made of materials that

are guaranteed to melt within 1% of their rated temperature. Mark the workpiece before heating begins. The dry opaque Tempolstik mark will change to a distinct melted mark when the temperature rating of the selected Tempilstik has been reached. Available in the Fahrenheit line from

 100°F to 2,000°F

  

  

                  Nissen Solid Paint Markers make marking smooth, fast and easy. The markers are solid sticks of paint protected by an unbreakable plastic case.

  

                  Dalo permanent paint marker has a higher paint capacity than the Texpen. It has a precision, stainless steel ball point tip. It withstands rubbing without losing legibility or brightness. Marker works when writing upside down. The Dalo has an extra large aluminum paint storage tube. It lasts longer. The larger tube also makes it easier to grip with gloves on.

    

           Pyromark is a specially formulated coating that protects, decorates and color identifies metal surfaces subject to high temperatures. It offers extraordinary absorptivity and emissivity properties.

  

  

Gauging Paste

  

  

Kolor Kut Oxygenated Modified Water Finding Paste 2.5oz Tubes
This paste is designed for use in Methanol, Ethanol enriched fuel systems. Alcohols are soluble in fuels in all proportions when they are water free, but relatively small amounts of water can cause separation of alcohol from the fuel. The mixture setting to the bottom of the storage tank is predominately alcohol and cannot be detected by most water detection paste. Color changes depending on percentage of water content .

  

Kolor Kut Water Finding Paste 3oz Tube
Used in all Petroleum by-products for water interface level. Successfully gauge all petroleum and by-products for water content. Also Sulphuric Acid, Nitric Acid, Hydrochloric Acid, Soap Solution, Salt and all other Chloride solutions.

  

Kolor Kut Gasoline Finding Paste 2.25oz Jar
Used to indicate the product level on light or clear products. Successfully  gauge for gasoline, crude oils, kerosene, Jet Fuels, Naptha and various other gas oils and chemicals

  

  

More Industrial Chemicals

  

A. METAL PREPARATION:
- RUST REMOVER
- CORROISION PREVENTIVE
- ANTI-RUST COATING
- RUST CONVERTER & METAL
CONDITIONER
- PAINT AND VARNISH REMOVER
- LIQUID METALLIC SIDING

B. INDUSTRIAL DEGREASER:
- ELECTRO SOLV
- STANDARD SOLVENT DEGREASER
- WATER SOLUBLE DEGREASER
- EMULSIFIABLE DEGREASER
- COLD TANK DEGREASER & CARBON
REMOVER

C. LUBRICANT:
- PENETRATING OIL
- OPEN GEAR LUBRICANT
- HIGH TEMP GREASE ( MOLYBDENUM
DISULFIDE OR RED)
- WIRE ROPE LUBRICANT

D. COOLANT
- CUTTING OIL ( WATER SOLUBLE)
- BOLIER & COOLING SYSTEM DESCALER
- RADIATOR CLEANER
- ANTI-ALGAE
- RADIATOR COOLANT

E. INSTITUTIONAL PRODUCTS:
- MULTI-PURPOSE CLEANER
- TILE & BOWL CLEANER
- LIQUID DRAIN OPENER

F. SPECIAL PREPARATION:
- INSULATING VARNISH ( RED & CLEAR )
- STEAM CLEANER
- CEMENT REMOVER

G. OILS
- SYNTHETIC COMPRESSOR OIL
- SPINDLE OIL
- FLUSHING OIL
- HYDRAULIC OIL
- SILICON OIL

H. SKIN TECT & SKIN TECT PLUS
- invisible second skin

 

Back to Top | Pages: 1 2 3 4 5

   

Can't find what you're looking for?

We represent many suppliers and not every product is found on this site. We welcome
the opportunity to quote on your special request and source the exact product you need.

Call us at 735-0581 to 83; 495-0187 to 88 for assistance.

 

 

Home | About Us | What's New | Contact Us