Tels: 735-0581 to 83; 495-0187 to 88

Pages: 1 2
Choose a Sub Category :

Fire Fighting EquipmentFace Shields

Firedex Helmet

Tough through-color, pigmented fiberglass is a reinforced, high-temperature composite shell. Resists cracking, chipping, sharp object penetration, and hides scratches. The long-lasting and easy-to-clean, high gloss, flame retardant finish resists scratches and ultra-violet rays. Highly visible fluorescent 3MTM ScotchliteTM Reflective material triple trim chevron pattern. Ultra-soft calfskin-lined, cushioned brow for maximum comfort.Front headband height adjustment permits use with virtually all SCBA facemasks. Impact insert is made of heat insulating polyurethane foam and is one-piece molded to a PC/ABS laminate flame-resistance inner liner.

 

Morning Pride Helmet

The NFPA 1951 certified Heavy Duty helmets are based on Plus technology. It offers slimmer profiling for maneuvering in tighter spaces. The Lightweight helmets are based on fire helmet technology and are co-certified to NFPA 1977.

 

Sancheong Helmet

Specially designed helmets to protect firefighters face and head it ensures efficiency and freedom of movement. Anti Shock Poly carbonate. Helmet's front with fire fighters Mark has ultraviolet rays coating with elegant color. The helmet's edge has compressed PVC and helmet's protection cover is attached to it. The lens is anti scratch with Ultraviolet rays coating and can be pulled down or pushed back. Wall hanging ring. The Size of the helmet can be adjusted. The helmet can be comfortably used with a breathing apparatus. Weight is 1.15 Kg

Fireman Helmet Flashlight

Single, high-intensity 1W LED is focused into a narrow beam that makes it brighter than five standard LEDs. Won't burn out; won't break if dropped. Batteries last three to four times longer than in standard lights. Fresh batteries maintain constant brightness for over 11 hours. Push-button thumb switch with continuous or momentary operation. Drop-in battery compartment for quick, easy reloading. Runs on four AA alkaline batteries (included). Dimensions: 6.1" x 1.6" x 1.4".

Flame Resistant Hood
Nomex Superior head and neck protection for those who work near open flames. Features flat lock seams for greater comfort when worn beneath helmets or other headgear. Extra-long bibs extend onto the shoulders, providing effective coverage. Face openings are edged with long-wearing elastic for a dependable face seal. Nomex Hood features 100 percent knit Nomex material, including a two-ply hood and single-ply bib.

 

Chieftain

Traditional style turnout gear features a 35"L coat and regular rise pants. NOMEX IIIA Turnout Coat outer shell is constructed of Nomex IIIA fabric with reflective Scotchlite trim. Yellow coat has red / orange trim and black coat has lime / yellow trim. Inside, the linings are quilted Nomex batting combined with a Stedair 3000 moisture barrier. Coat includes an integral Drag Rescue Device that allows a rescuer to drag a downed firefighter in a horizontal position. Gray leather reinforced sleeve cuffs and shoulder caps. NOMEX IIIA Turnout Pants are regular-rise. One semi-bellow / cargo pocket with hook-and-loop closure on right thigh. X-style suspenders and gray leather reinforced cuffs. Compliance: NFPA 1971.

PBI Matrix

Rugged, high-performing PBI matrix outer shell, combines with DexFlex knees, back and elbows for added comfort and remains strong and flexible after exposure to flame.
PBI Matrix is a safe and cost-effective solution for your turnout gear. Integral Drag Rescue Device allows a rescuer to drag a downed firefighter in a horizontal position. Coat liner of quilted Para-Aramid batt sewn to Crosstech® moisture barrier. Long NOMEX knitwrists with thumbhold and gold Arashield reinforced sleeve cuffs help protect hand/wrist area. Inner zipper/outer hook-and-loop closure. Combination 9"W x 9"L x 2"D hand warmer/semi-bellows pockets. Universal strap above radio pocket. PBI Matrix Assault Pants with 6" rear panel gives you good range of motion and added protection when bending. Pants feature full bellows left pocket and split bellows right pocket. H-style suspenders and gold Arashield reinforced cuffs. Two NOMEX webbing takeup straps with thermoplastic buckle at waist. NFPA 1971.

PNP Design

PNP designed outer shell fabrics combined with an innovative, high mobility design makes this gear the right choice for comfort without sacrificing an inch of protection.Jacket has a superior range of motion and weighs less. 3-piece outer shell and liner has Scotchlite, combination red/orange, lime/yellow on black for maximum visibility. Shoulders and cuffs are reinforced for thermal protection and durility. Combination semi-bellows and hidden hand warmer pockets. The back panel on the Pants extends above the waist and over the lower back for better protection when bending. Pants have a four-piece outer shell and liner with reinforced cuffs and knee patches and H-style suspenders.

 

 

Aluminized Proximity Suit

750 SERIES PROXIMITY Suit - Designed for short duration ambient heat of 550 degrees F (288 degrees C), radiant heat to 2000 degrees F (1093 degrees C). Used areas where steam or volatile materials are present.

 


Fire Entry Suit
Newtex is one of the few manufacturers worldwide with the technology to make fire entry suits that meet the most demanding high temperature environments. The Fire Entry suits come with 7 layers of insulation for maximum protection and incorporates room for breathing apparatus. Each suit comes in a set of Hood, Coat, Pants, Boots, and Mitts.

2000 Series - Designed for short duration ambient heat of 1500 degrees F (815 degrees C), radiant heat to 2500 degrees F (1371 degrees C), and total flame of 2000 degrees F (1093 degrees C). Weighs 48 pounds (22 kg).

3000 Series - Same as 2000 series but with added protection from radiant heat. Designed for short duration ambient heat of 1500 degrees F (815 degrees C), radiant heat to 3000 degrees F (1650 degrees C), and total flame of 2000 degrees F (1093 degrees C). Weighs 54 pounds (25 kg).

Fire Fighter Suspenders

Wide, Comfortable Cotton Webbing Straps. Heavy Duty Elastic Ends. 8-point Heavy Duty Button Loops. One Size Fits Most.

Kevlar sleeves

with thumbhole. High tensile strength at low weight, high chemical resistance, low thermal shrinkage, low electrical conductivity, high cut resistance, flame resistant, self-extinguishing.

 

Firedex Gloves

Provide thermal stability with excellent durability and penetration resistance against blood, body fluids, and common fireground chemicals, while allowing the glove to breathe for faster glove dry-out between runs.
Double chrome tanned heat-resistant leather. Gunn cut, Straight thumb.

Aluminized Combination Gloves

Two styles of fully lined aluminized gloves, clute-style gloves with aluminized backs to shield your hands from dangerous burns. Offer long-wearing leather palms, plus the insulating strength of a wool inner lining. Interiors are fully lined with flame-retardant.

Click here: other high temperature gloves

 

Ranger Fire Boots

Fire-grade Ranger rubber is formulated for high-heat stability and ozone resistance. It also resists contaminants that can cause ordinary boots to deteriorate. Wool felt lining and midsole. Extra heel reinforcement. White Sure Loc™ outsole. Built-in steel-toe cap and flexible, stainless steel midsoles. Insulated Boots have built-in polyfoam insulation to guard against extreme heat. Compliance: NFPA 1971. UL listed. Meet all ANSI, OSHA and CAL-OSHA standards.

Supertuff Fire Boots

Totally watertight in intensive use. Excellent resistance to heat, heat flow and flames. Good resistance to explosive hazards and contact with commonly used chemicals, steel toe-cap ( anti-impact ), and insole (anti-penetration).

   

Back to Top | Pages: 1 2

   

Can't find what you're looking for?

We represent many suppliers and not every product is found on this site. We welcome
the opportunity to quote on your special request and source the exact product you need.

Call us at 735-0581 to 83; 495-0187 to 88 for assistance.

 

 

Home | About Us | What's New | Contact Us